Software Flow Control - Datalogic Magellan 8300 Product Reference Manual

In-counter scanner/scales

Hide thumbs Also See for Magellan 8300:

Table of Contents

RS-232 Software Flow Control

Enables/disables RS-232 Flow Control using XON/ XOFF characters. .

This item will be ignored when the feature,

ter, is enabled

To set this feature:

1. Scan the SWITCH bar code.

2. Scan either the enable or disable bar code below. You'll need to cover

any unused bar codes on this and the facing page to ensure that the

scanner reads only the bar code you intend to scan.

3. Complete the programming sequence by scanning the SWITCH

RS-232 SOFTWARE FLOW CONTROL = DISABLE

RS-232 SOFTWARE FLOW CONTROL = ENABLE

RS-232 NAK Charac-

Show Quick Links

Table of Contents

Magellan 8400