Datalogic Magellan 8300 Product Reference Manual page 99

NO TRANSMIT TO POS
START
Check the interface (I/F)
cable connections. If
possible, retest the
system using a known-
good I/F cable.
Does the
scanner pass
the data to
the POS
?
YES
DONE
Product Reference Guide
Figure 4-5. Problem Isolation: No Transmit to POS
Verify programmable
parameters using the
information and programming
bar codes provided in Section
6. Check interface and I/F
options, inactive symbologies
and other configurable
features.
NO
Does the
YES
scanner read
DONE
satisfactorily
?
NO
Troubleshoot
the host or call
Tech Support.
Flowcharts
4-11