Datalogic Magellan 8300 Product Reference Manual page 66

Scanner Right Profile
EAS Port
EAS PORT AUXILIARY PORT
· Test Port
Connection to
· On Screen
external EAS device.
Programming (OSP)
Controls EAS
· Application Download
deactivation system.
· RS-232 Handheld
Scanner Input
· Auxiliary RS-232
Label Data Output
Connection to
this port is
Optional
2-34
If you have a scanner with no scale, there will be only one interface cable
to the POS terminal.
4. Connect the power cord to the scanner and route the other end
down through the checkstand to the AC power outlet. DO NOT
plug the power cord in at this time.
Figure 2-25. Connecting Cables to the Scanner/Scale
Control Panel
Service Loop
Aux. Port Power
POWER
AC Brick Input
OR
Power off Terminal
(POT) Brick Input
Scanner Left Profile
0.00
POS Terminal Remote Display
POS TERMINAL REMOTE DISPLAY
· Label Data Drives Remote Display
· Scale Data (for
single cable interfaces)
· Application Download
(where appropriate)
Models with scale
only
Scale Host
SCALE HOST
Scale Data (dual
cable scanner/scale)
Dual cable units only.
(Scale connection may
be handled through
POS Terminal port)
TM
Magellan 8300/8400