Unpacking - Datalogic Magellan 8300 Product Reference Manual

Unpacking

NOTE
Product Reference Guide
6. Functional testing to verify operation when connected to the POS
system.
The following text describes each of these steps.
To unpack the unit:
• Inspect the package for signs of damage that may have occurred
during shipping. If damage is found, report it to your carrier imme-
diately.
• Lift out the accessory box containing the AC/DC Power Supply,
optional Remote Scale Display and cable (if present), and the Quick
Reference Guide.
• Remove the Quick Reference Guide and familiarize yourself with
the unit's controls and features. Leave the guide at the checkstand
when the installation is complete.
• Remove the protective packing and carefully lift the unit from the
carton. Be sure to save the box and all packing material. In the event
of failure, the unit must be returned to the factory in its original
.
packaging
• Carefully lift off the L-Platter as shown in
the protective foam pieces securing the weigh mechanism. Set the
platter back in place.
For added protection during shipment, the L-Platter is covered
with a tight-fitting layer of vinyl as shown in
vinyl layer MUST BE REMOVED before placing the unit into
service.
Installation Overview
Figure 2-26
and remove
Figure 2-18. This
2-21