Symbology Programming
NOTE
Coupon Control
6-160
If the scanner's interface type must be changed, always be
sure that interface configuration is the FIRST item scanned
during a programming session. (Selecting an interface type
resets ALL other configuration items — including symbol-
ogy programming — to the factory default for that interface
type.)
Used to control the method of processing coupon labels.
Options are:
•
Disable coupon decoding
•
Enable UPC/EAN coupon decoding
•
Enable RSS coupon decoding
To set this feature:
1. Scan the SWITCH bar code.
2. Scan either the enable or disable bar code below. You'll need to cover
any unused bar codes on this and the facing page to ensure that the
scanner reads only the bar code you intend to scan.
3. Complete the programming sequence by scanning the SWITCH
bar code.
COUPON CONTROL = DISABLE
TM
Magellan
8300/8400