Base Station Models; Connection Box Models; Installation; Package Contents - Datalogic PowerScan BC96 Series Quick Reference Manual

base station Models

BASE STATION MODELS
Each base station is composed of a cradle which must be connected to a con-
nection box, depending on the interface desired and on the IP (water and
dust) protection grade.
The base station and connection box models are listed below.
Base Station Models
BC9600-433
BC9600-910
BC9630-433
BC9630-910
BC9631-433
BC9631-910
BC9680-433
BC9680-910

Connection Box Models

CM9630
CM9631
CM9680

INSTALLATION

To set up your BC96XX base station you must:
1. Physically install it.
2. Make all system connections.
3. Configure it.

PACKAGE CONTENTS

The base station package contains the following items:
BC96XX Base Station (with Desktop Positioning Tab installed)
•
BC96XX Quick Reference Guide (this manual)
•
1 Mounting plate
•
1 Wall Mounting Bracket
•
2
BC96XX BASE STATIONS
BASE/CHARGER 433MHZ w/o conn. box
BASE/CHARGER 910MHZ w/o conn. box
BASE/CHARGER 433MHZ M-INT
BASE/CHARGER 910MHZ M-INT
BASE/CHARGER 433MHZ M-INT IP65
BASE/CHARGER 910MHZ M-INT IP65
BASE/CHARGER 433MHZ ETH
BASE/CHARGER 910MHZ ETH
CONN MOD M-INT
CONN MOD M-INT IP65
CONN MOD ETH