Customizing The Www Login Page - ZyXEL Communications UAG2100 User Manual

The following table describes the labels in this screen.
Table 188
LABEL
Create new
Object
Address Object
Zone
Action
OK
Cancel

40.7.6 Customizing the WWW Login Page

Click Configuration > System > WWW > Login Page to open the Login Page screen. Use this
screen to customize the Web Configurator login screen. You can also customize the page that
displays after an access user logs into the Web Configurator to access network services like the
Internet. See
Configuration > System > Service Control Rule > Edit
DESCRIPTION
Use this to configure any new settings objects that you need to use in this screen.
Select ALL to allow or deny any computer to communicate with the UAG using this service.
Select a predefined address object to just allow or deny the computer with the IP address
that you specified to access the UAG using this service.
Select ALL to allow or prevent any UAG zones from being accessed using this service.
Select a predefined UAG zone on which a incoming service is allowed or denied.
Select Accept to allow the user to access the UAG from the specified computers.
Select Deny to block the user's access to the UAG from the specified computers.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving
Chapter 31 on page 285
UAG2100 User's Guide
Chapter 40 System
for more on access user accounts.
372