Alarm; History - Chint Power CPS SCA20KTL-DO Installation And Operation Manual

Remarks：The LCD display is shown as follows when PV parallel mode is
selected.
Figure 5-9 Operation information indication (PV parallel mode)

5.4.2 Alarm

As described before, if a fault occurs during normal operation of the
inverter, corresponding fault messages will be indicated in "2 Alarm" menu in
addition to the sound and light alarms. Move the cursor to "2 Alarm" and press
ENT to check out the specific fault information, as shown in Figure 5-10.
2 Alarm

5.4.3 History

Move the cursor to "3 History" in the main interface. Press ENT to check
the history information, as shown in Figure 5-11. There are 4 submenus in "3
Upv
Ipv
No
Yes
Figure 5-10 Alarm / failure information
360.0V
14.7A
No Alarm
EepromErr
Protect0010
62
...