Table of Contents
Advertisement
Audio (input) function section
1 <MIC IN> (microphone input) terminal (page 98)
f Connect the microphone (optional).
f Can also be used for connecting the phantom microphone. When
using the phantom microphone, set the [F.MIC POWER] item on the
setting menu [AUDIO SETUP] screen to [ON].
2 <F.AUDIO LEVEL> (audio recording level adjustment) dial
(page 62)
f Adjust the recording level of audio channels 1 to 4.
f When the adjustment method for the recording level is set to
[MANU] on the [AUD02:INPUT] screen of SmartUI, the recording
level of the audio channel can be adjusted with this dial.
f Set which input terminal operation of this control works on by the
[FRONT VR CH1], [FRONT VR CH2], [FRONT VR CH3], and
[FRONT VR CH4] items on the setting menu [AUDIO SETUP]
screen.
3 <AUDIO IN CH1/3>, <AUDIO IN CH2/4> (audio input channel 1/3,
2/4) terminals (page 98)
Connect audio equipment or the microphone.
4 <LINE>/<MIC> (line input/microphone input) selector switch
(page 98)
Switch the audio input signal connected to <AUDIO IN CH1/3> and
<AUDIO IN CH2/4> (audio input channels 1/3, 2/4) terminals.
<LINE>
Audio input signals from line-input audio equipment
<MIC>
Audio input signal from the microphone
5 Microphone input <+48V> ON/OFF switch (page 155)
Turn on/off the power supply to the microphone connected to the
<AUDIO IN CH1/3> and <AUDIO IN CH2/4> (audio input channels
1/3, 2/4) terminals.
<+48V>
Supplies +48 V power to the microphone.
<OFF>
Does not supply power to the microphone.
6 Wireless slot (page 98)
Mount the UniSlot wireless receiver (optional).
Chapter 2 Description of Parts — Audio (input) function section
1
2
– 21 –
6
4
3
5
Advertisement
Table of Contents
