Table of Contents
Advertisement
Item
WFM
Selects the type of waveform to be displayed on the viewfinder screen when the
<USER> buttons (<USER MAIN>/<USER1>/<USER2>) to which the waveform
monitor function is assigned is pressed.
[WAVE]
[VECTOR]
[WAVE/VECT]
AUTO KNEE SW
Selects the function for the <OUTPUT>/<AUTO KNEE> selector switch.
[DRS]
[ON]
[OFF]
[RECORDING SETUP] screen
Item
REC FUNCTION
Sets special recording mode. (page 41)
[NORMAL]
[INTERVAL]
[ONE SHOT]
[LOOP]
f It is always set to [NORMAL] when the power is turned on.
ONE SHOT TIME
Sets the recording time of one-shot recording. (page 42)
[1frm], [2frm], [4frm], [8frm], [16frm], [1s]
INTERVAL TIME
Sets the interval time for interval recording. (page 41)
[2frm], [4frm], [8frm], [16frm], [1s], [2s], [5s], [10s], [30s], [1min], [5min],
[10min]
START DELAY
Delays the start of interval recording and one-shot recording approximately one
second.
[ON], [OFF]
PREREC MODE
Sets the pre-recording mode. (page 41)
[ON], [OFF]
ONE CLIP REC
Sets one-clip recording mode. (page 43)
[ON], [OFF]
START TEXT MEMO
Sets the function that automatically adds a text memo at recording start position
each time recording is started.
[ON], [OFF]
TC MODE
Sets count compensation for the built-in time code generator of the camera.
(page 68)
[DF]
[NDF]
UB MODE
Sets the content to be recorded in user bits. (page 66)
[USER], [TIME], [DATE], [EXT], [TCG], [FRM.RATE]
Chapter 7 Menu Operations — Menu list
Description of settings
Displays as a waveform.
Displays as a vector.
Changes display in order of [OFF] → [WAVE] → [VECTOR] →
[OFF] each time the button is pressed.
Activates the dynamic range stretcher function when the
<AUTO KNEE> selector switch is set to <ON>. (page 13)
Activates the auto knee function when the <AUTO KNEE>
selector switch is set to <ON>.
Does not activate the auto knee function when the <AUTO
KNEE> selector switch is set to <ON>.
Description of settings
Does not perform special recording.
Sets interval recording.
Sets one-shot recording.
Sets loop recording.
Counts in drop frame mode.
Counts in non-drop frame mode.
– 126 –
Remark
f When 1080i and progressive mode are set, the
dynamic range stretcher function is not activated
even if [DRS] is selected, and the auto knee
function activated when [ON] is selected operates.
f When the dynamic range stretcher function is
activated, the digital zoom function is disabled.
indicates factory setting values.
Remark
f This setting is not available in the following cases:
- The [REC SIGNAL] item is set to [SDI IN].
- Native recording is set with the [REC FORMAT]
item.
- The [SYSTEM MODE] item is set to
[1080-59.94i] or [480-59.94i], and the [CAMERA
MODE] item is set to [24P] or [24PA].
- Clip connection is underway with one-clip
recording.
- The [VFR] item is set to [ON].
f This setting is available only when the [REC
FUNCTION] item is set to [ONE SHOT].
f This setting is available only when the [REC
FUNCTION] item is set to [INTERVAL].
f This setting is available only when the [REC
FUNCTION] item is set to [INTERVAL] or [ONE
SHOT].
f This setting is not available in the following cases:
- The [REC SIGNAL] item is [SDI IN].
- The [VFR] item is set to [ON].
Excluding the case when the frame rate and
the number of frames of recording playback are
matched (30P:30PN, 25P:25PN, 24P:24PN)
- The [REC FUNCTION] item is set to other than
[NORMAL].
f This setting is not available in the following cases:
- The [REC FUNCTION] item is other than
[NORMAL].
- The [REC SIGNAL] item is [SDI IN].
- The [VFR] item is [ON].
Excluding the case when the frame rate and
the number of frames of recording playback are
matched (30P:30PN, 25P:25PN, 24P:24PN)
f This setting is not available when the [REC
FUNCTION] item is other than [NORMAL].
f Text memos added when the [START TEXT
MEMO] item is [ON] indicate recording start
position.
To record text memos as character information,
refer to "Setting clip metadata" (page 110).
f This setting is not available when activating in
[24P], [24PA], or [24PN]. Counting is always
performed in the non-drop frame mode.
indicates factory setting values.
Advertisement
Table of Contents
