Table of Contents
Advertisement
Chapter 2 Description of Parts — Shooting and recording/playback functions section
Set the switch to this position when you have no time to
adjust the white balance.
f The factory setting is 3200 K.
f The color temperature can be changed successively to
3200 K, 5600 K, and the user-specified variable value
<PRST>
by the setting menu or by pushing the <AUTO W/B
BAL> switch towards the <AWB> side, and pushing
the <AUTO W/B BAL> switch towards the <AWB> side
again while the color temperature is displayed. The
variable value can be set at SmartUI. (page 140)
33
27 26
25
24
13
14
12
21
r Shooting and recording/playback functions section (Recording
unit)
10 <REC> button (page 36)
Press this button to start recording, and press again to stop recording.
This button has the same function as the VTR button on the lens side.
11 <MONITOR SEL> button
Switch the audio channel that is output to the speaker, the
<PHONES> terminal, and the <AUDIO OUT> terminal to [CH1/2] or
[CH3/4] each time you press the button. The channel display of the
audio channel level meter is switched together.
When the screen other than the [HOME] screen of SmartUI is
displayed, the function corresponding to each setting screen is
executed.
12 <%/REW> (rewind) button
Press this button during a pause to perform fast-reverse playback.
Press it during playback to perform fast-reverse playback at
approximately 4x speed.
If it is pressed with playback paused, the clip being played back is
paused at its start point (cued state).
When the screen other than the [HOME] screen of SmartUI is
displayed, the function corresponding to each setting screen is
executed.
31
11
HOLD
COUNTER
RESET MONITOR SEL
LIGHT
16
TC
NDF SLAVE P -REC
CAM
17
0
AUDIO
18
-10
CH1
MEDIA
A
-18
E
F
-20
SETUP
CH2
-30
BATT
19
dB
E
F
1
2
HOME
20
/REW
STOP
FF/
PLAY/PAUSE
THUMBNAIL
KEY LOCK
15
SET
TOP
SHIFT
MULTI SEL
EXIT
MENU
CANCEL
BOTTOM
22 23
Pressing the <AUTO W/B BAL> switch towards <AWB>
<A>/<B>
automatically adjusts the white balance and saves the
adjusted value to memory A or B.
You can also assign the auto tracking white balance (ATW) function to
<B> in the setting menu. (page 54)
9 Focal plane index < >
Indicates the focal plane of the MOS sensor.
It provides a reference for making accurate focal distance
measurements from the subject.
28
29
30
13 <FF/)> (fast forward) button
Press this button during a pause to perform fast playback.
Press it during playback to perform fast playback at approximately 4x
speed.
If it is pressed with playback paused, the clip being played back is
paused at the start point of the next clip (cued state).
When the screen other than the [HOME] screen of SmartUI is
displayed, the function corresponding to each setting screen is
executed.
14 <STOP> (stop) button
Press this button to stop playback.
Also press it to stop interval recording and one-shot recording, or to
end combining of clips in one-clip recording.
When the screen other than the [HOME] screen of SmartUI is
displayed, the function corresponding to each setting screen is
executed.
15 <PLAY/PAUSE> (play/pause) button
Press this button to view the playback image using the viewfinder
screen or the monitor screen.
Pressing this button during playback pauses playback.
When the screen other than the [HOME] screen of SmartUI is
displayed, the function corresponding to each setting screen is
executed.
16 <LIGHT> button
Control lighting of SmartUI. Each press toggles lighting of SmartUI on
and off.
– 24 –
10
32
Advertisement
Table of Contents
