Table of Contents
Advertisement
r Example of recording a clip on two P2 cards
When the thumbnail and property of a clip recorded like the example above is displayed using a P2 device, the thumbnail and [COUNT] value of clip 1
will be displayed.
Initializing the metadata setting
Select [META DATA] → [INITIALIZE] from the thumbnail menu, and press the <SET> button. Select [YES] when the confirmation screen is displayed.
The settings under [META DATA] in the thumbnail menu, including uploaded metadata, can be initialized.
Formatting a P2 card
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Press the <THUMBNAIL MENU> button, and select
[OPERATION] → [FORMAT] from the thumbnail menu.
f When the following screen appears, select the slot number of the P2
card to be formatted and press the <SET> button.
f Select [EXIT] when you do not wish to format the card.
Formatting SD memory cards
SD memory cards can also be formatted from the thumbnail screen. With an SD memory card inserted into the camera, perform the following operation.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Press the <THUMBNAIL MENU> button, and select
[OPERATION] → [FORMAT] from the thumbnail menu.
f When the following screen appears, select [SD CARD] and press
the <SET> button.
f Select [EXIT] when you do not wish to format the card.
Setting the thumbnail display
The thumbnail display mode can be customized to suit your preferences.
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
Start recording
Clip 1
[COUNT] value
= 0003
1st card
Recording pause
Clip 2
[COUNT] value
= 0004
2nd card
3
When the following screen appears, select [YES] using the
cursor buttons and the <SET> button.
The selected P2 card is formatted.
NOTE
@
t Since data that is deleted by formatting cannot be restored, be
sure to check the data before executing formatting.
3
When the following screen appears, use the cursor buttons
and the <SET> button to select [YES].
The SD memory card is formatted.
NOTE
@
t SD memory cards can also be formatted from the menu screen.
For details, refer to "Formatting SD memory cards" (page 85).
t Since data that is deleted by formatting cannot be restored, be
sure to check the data before executing formatting.
– 113 –
Advertisement
Table of Contents
