Setting The Time Code - Panasonic ag-hpx600p Operating Instructions Manual

r When 1080i or 480i
Frame rate:24P Over 60i (2:3)
Start field for updated frame
Time code frame digit
00 01 02 03 04 05
Video
Ao Ae Bo Be Bo Ce Co De Do De Ao Ae Bo Be
Sequence No.
0 1 2 3 4 0
Updated frame information
10 10 01 01 00 10
Frame rate:24PA Over 60i (2:3:3:2)
Time code frame digit
00 01 02 03 04 05
Video
Ao Ae Bo Be Bo Ce Co Ce Do De Ao Ae Bo Be
Sequence No.
0 1 2 3 4 0
Updated frame information
10 10 01 00 10 10
Frame rate:30P Over 60i (2:2)

Setting the time code

1
Set the [TC MODE] item on the setting menu [RECORDING
SETUP] screen to [DF] or [NDF].
For details, refer to "Setting menu basic operations" (page 118).
f To advance the time code in the drop frame mode, set to [DF],
and to advance it in the non-drop frame mode, set to [NDF]. Note,
however, that the time code runs by [NDF] at all times in the 24P,
24PA and 24PN modes.
2
Use the <HOME> button to set the SmartUI screen to the
[HOME] screen.
3
Set the counter display to [TC] by the <COUNTER> button.
4
Use the <SETUP> button to set the SmartUI screen to the
[SET01:TC/UB] screen.
5
Set the [TCG] item to [SET].
6
Set the time code.
Time code available ranges
For 59.94 Hz (except for 00:00:00:00 - 23:59:59:29
24PN)
24PN 00:00:00:00 - 23:59:59:23
For 50 Hz: 00:00:00:00 - 23:59:59:24
SET01:TC/UB
h min
F-RUN
SET R-RUN
[ TCG ] [ TC MD ]
Time code function during battery replacement
Even during battery replacement, the backup mechanism functions, allowing the time code generator to continue operating.
NOTE
@
t When the <POWER> switch has been switched to <ON> → <OFF> → <ON>, the backup accuracy of the time code in the free run mode is
approximately ±2 frames.
Chapter 4 Adjustments and Settings for Recording — Setting the time data
06 23 24 25 26 27 28
Co De Do De Ao Ae Bo Be Bo Ce Co De Do De
1 3 4 0 1 2 3
10 01 00 10 10 01 01
06 23 24 25 26 27 28
Co Ce Do De Ao Ae Bo Be Bo Ce Co Ce Do De
1 3 4 0 1 2 3
10 00 10 10 10 01 00
[ RST ]
s frm
[ - ] [ + ]
29
r 720P mode
Frame rate:24P Over 60P (2:3)
4
Updated frame
Time code frame digit
00
00 01 02
Video
A A B B B C C
29
Updated frame information
10 10 01
Frame rate:30P Over 60P (2:2)
4
10
Item name
[→]
[+]
[−]
[RST]
7
Press [TCG] to apply the time code setting values and end
setting of the time code.
8
Press the <HOME> button to display the [HOME] screen of
SmartUI.
NOTE
@
t When using in the 24P or 24PA mode, the time code setting
is adjusted in 5-frame units. In the 24PN mode, the setting is
adjusted to multiples of four, and in the 720/30PN or 720/25PN
mode, it is adjusted to an even number. The time code cannot
be set during recording.
t Newly set values are invalid if the screen is switched without
pressing [TCG].
– 68 –
Time code frame digit
00 01 02
Video
Ao Ae Bo Be Co Ce
Updated frame information
10 10 10
03 04 05 06 23 24 25
D D D A A B B C D D D A A B B B C C D D D
01 00 10 10 01 00 10
Time code frame digit
00 01 02
Video
A A B B C C
Updated frame information
10 10 10
Description
The digit to be set (displayed inverted) moves to the
right.
The value of the inverted digit is incremented by one.
The value of the inverted digit is decremented by
one.
The values of all digits are reset to 0.
26 27 28 29
10 01 01 00