Table of Contents
Advertisement
Updating the camera firmware
There are two ways to update the firmware:
1 Use the dedicated tool P2_Status_Logger to check and apply the update.
This option is available only to customers who register to PASS (P2 Asset Support System).
Log in to PASS and use the dedicated tool (P2_Status_Logger) to check the version information of your device and to access the download page of
the required firmware.
For details about downloading and using P2_Status_Logger, refer to the pages displayed after logging in to PASS.
Other benefits are offered to registered customers. For details, refer to the PASS (P2 Asset Support System) site (http://panasonic.biz/sav/pass_e).
2 Check the version using the camera and apply the update
Check the version of the camera on the setting menu [DIAGNOSTIC] screen, and access the latest information about the firmware described in the
following NOTE, and then download the firmware as needed.
NOTE
@
t Update completes by loading the downloaded files to the camera via the SD memory card. For details on update, visit the support desk at the
following website:
http://pro-av.panasonic.net/
t Use the SD memory card that complies to the SD or SDHC standard.
Always use the camera to format the SD memory card.
Chapter 10 Maintenance and Inspection — Updating the camera firmware
– 160 –
Advertisement
Table of Contents
