Error Displays About Proxy Data Recordings - Panasonic ag-hpx600p Operating Instructions Manual

Memory card camera-recorder
Table of Contents

Advertisement

Chapter 11 Additional Functions from the Optional Board — Video encoder board (AG-YDX600G)
- [EXCH. THUMBNAIL]
- Adding and deleting [TEXT MEMO] and [SHOT MARK]
Playback is supported.
On these devices, individual clips with proxy data combined from multiple clips are displayed as an incomplete clip [
MP4] mode)
Checking detailed information of the proxy data
The operation method or the panels may differ based on the models and versions of the camera.
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Press the <THUMBNAIL MENU> button and select
[PROPERTY] → [CLIP PROPERTY] from the thumbnail menu.
A screen like the one below is displayed. Use the cursor buttons to
move the cursor to the [PROXY] item.
3
Press the <SET> button.
Detailed information about the proxy data is displayed as below.

Error displays about proxy data recordings

If an error occurs during recording the proxy data, check the entries in the following table and take necessary actions.
Error displays
(viewfinder screen)
[PROXY BOARD ERROR] or
Proxy data recording will stop, but recording of the original
[PROXY REC WARNING]
material will continue.
f Error in the board
f Proxy data recording error
f If a proxy data recording error occurs, the proxy data currently
[NEAR END (SD)]
Recording of the original materials and proxy data will continue.
f The remaining SD memory card capacity is getting low
[EOM (SD)]
Proxy data recording to the SD memory card will stop, but
recording to the P2 card will continue.
f The remaining SD memory card capacity ran out.
Behavior and cause
[PROXY BOARD ERROR]
[PROXY REC WARNING]
being recorded will be processed as below:
- The proxy data being recorded to the P2 card will be
deleted.
- The proxy data being recorded to the SD memory card will
not be restored.
(approximately shorter than one minute).
[FORMAT]
[VIDEO CODEC]
[VIDEO FRAME RATE]
[VIDEO BIT RATE]
[VIDEO RESOLUTION]
[ASPECT RATIO]
[TC SUPER]
[AUDIO CODEC]
[AUDIO BIT RATE]
[AUDIO SAMPLING
RATE]
[NUM.OF AUDIO CH]
The proxy data will not be properly recorded. Turn the camera
off and turn it back on again to check the recording and
playback.
After finishing recording, insert a new SD memory card.
After finishing recording, insert a new SD memory card.
f The proxy data being recorded to the SD memory card will
be deleted.
To restore the deleted proxy data, select clips in the P2 card
and copy them to the SD memory card. (page 166)
– 165 –
]. (Except in [STD 2CH
The file format of the recorded data is
displayed.
Video codec information of the recorded data
is displayed.
Video frame rate information of the recorded
data is displayed.
Video bit rate information of the recorded
data is displayed.
The video resolution of the recorded data is
displayed.
The aspect ratio of the recorded data is
displayed.
An indication whether the TC (time code)
display is superimposed over the recorded
video.
Audio codec information of the recorded data
is displayed.
Audio bit rate information of the recorded
data is displayed.
Audio sampling rate information of the
recorded data is displayed.
The number of audio channels of the
recorded data is displayed.
Action to take

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-hpx600ejAg-hpx600en

Table of Contents