This becomes valid when the production pack (extra-cost option) is installed.
*2
For free run, the time code is slaved to the input TC of the <TC IN/OUT> terminal.
*3
For free run, the time code is slaved when the input TC of the <TC IN/OUT> terminal is a non-drop frame. However, it cannot be slaved during recording.
*4
For free run, the time code is slaved to the value obtained by conversion to 24 frames when the input TC of the <TC IN/OUT> terminal is a 30-frame non-drop
frame. However, it cannot be slaved during recording.
*5
For free run, the time code is slaved to the input TC of the <TC IN/OUT> terminal. It is not slaved to LTC or VITC of the SDI input signal.
*6
For free run, the time code is slaved when the input TC of the <TC IN/OUT> terminal is a non-drop frame of 24 frames. However, it cannot be slaved during
recording.
*7
For free run, the time code is slaved to the input TC of the <TC IN/OUT> terminal. However, it cannot be slaved during recording.
Recording and output of user bits
System setting state
[SYSTEM
[REC
[REC FORMAT]
MODE]
SIGNAL]
[DVCPROHD/60i]
[AVC-I100/60i]
[AVC-I50/60i]
[CAMERA]
[1080-59.94i]
[AVC-I100/30PN]
[AVC-I50/30PN]
[AVC-I100/24PN]
[AVC-I50/24PN]
[DVCPROHD/60i]
[SDI IN]
[AVC-I100/60i]
[AVC-I50/60i]
[AVC-I100/24PN]
[1080-23.98PsF]*
—
3
[AVC-I50/24PN]
[DVCPROHD/60P]
[AVC-I100/60P]
[AVC-I50/60P]
[DVCPROHD/30PN]
[CAMERA]
[AVC-I100/30PN]
[AVC-I50/30PN]
[720-59.94P]
[DVCPROHD/24PN]
[AVC-I100/24PN]
[AVC-I50/24PN]
[DVCPROHD/60P]
[SDI IN]
[AVC-I100/60P]
[AVC-I50/60P]
[CAMERA]
[DVCPRO50/60i]
[480-59.94i]
[DVCPRO/60i]
[SDI IN]
Chapter 4 Adjustments and Settings for Recording — Setting the time data