Table of Contents
Advertisement
Item
ZOOM/FOCUS
Selects the unit of zoom and focus values.
[NUMBER], [mm/m], [mm/feet], [OFF]
f When [mm/m] or [mm/feet] is selected
Displayed only when an auto-focus compatible lens is attached.
CARD/BATT
Sets the remaining capacity display for P2 card and battery.
[ON], [OFF]
P2CARD REMAIN
Selects the type of P2 card remaining capacity display for recording.
[ONE-CARD]
[TOTAL]
OTHER DISPLAY
Sets other information display items.
[PARTIAL]
[ALL]
[OFF]
MENU BACK
Selects whether to make characters stand out by lowering the background
transmittance while displaying the setting menu.
[ON]
[OFF]
REC COUNTER
Sets counter operation during recording.
[TOTAL]
[CLIP]
[BATTERY SETUP] screen
Item
EXT DC IN SEL
Sets the type of external DC power.
[AC ADAPTER] AC adaptor
[BATTERY]
BATTERY SELECT
Sets the battery type.
[HYTRON50], [HYTRON140], [DIONIC HC], [DIONIC90], [DIONIC160],
[ENDURA7], [ENDURA10], [PAG L96e], [TYPE A], [TYPE B]
BATTERY MODE
Sets the near end.
[AUTO]
[MANUAL]
HYTRON50 NEAR
Sets the near end voltage of [HYTRON50]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.4V] ... [15.0V]
HYTRON140 NEAR
Sets the near end voltage of [HYTRON140]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.1V] ... [15.0V]
DIONIC HC NEAR
Sets the near end voltage of [DIONIC HC]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.1V] ... [15.0V]
DIONIC90 NEAR
Sets the near end voltage of [DIONIC90]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.5V] ... [15.0V]
DIONIC160 NEAR
Sets the near end voltage of [DIONIC160]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.4V] ... [15.0V]
ENDURA7 NEAR
Sets the near end voltage of [ENDURA7]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.4V] ... [15.0V]
ENDURA10 NEAR
Sets the near end voltage of [ENDURA10]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.4V] ... [15.0V]
PAG L96e NEAR
Sets the near end voltage of [PAG L96e]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.1V] ... [15.0V]
TYPE A FULL
Sets the full voltage of [TYPE A]. (Can be adjusted in 0.1 V units.)
[12.0V] ... [15.5V] ... [17.0V]
TYPE A NEAR
Sets the near end voltage of [TYPE A]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.0V] ... [15.0V]
TYPE A END
Sets the end voltage of [TYPE A]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [12.7V] ... [15.0V]
TYPE B FULL
Sets the full voltage of [TYPE B]. (Can be adjusted in 0.1 V units.)
[12.0V] ... [15.6V] ... [17.0V]
TYPE B NEAR
Sets the near end voltage of [TYPE B]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [13.4V] ... [15.0V]
TYPE B END
Sets the end voltage of [TYPE B]. (Can be adjusted in 0.1 V units.)
[11.0V] ... [12.9V] ... [15.0V]
Chapter 7 Menu Operations — Menu list
Description of settings
Displays the remaining capacity of the card currently being
recorded.
Displays the total remaining capacity of two cards.
Displays partial information.
Displays all information.
Does not display.
Lowers the background transmittance.
Does not lower the background transmittance.
Continues counting by integrating until reset with the <RESET>
button.
Clears the count value when recording starts, and counts time
for each shooting.
Description of settings
Battery
Near end is set automatically with the battery selected with
[BATTERY SELECT].
Sets the near end voltage manually.
– 130 –
Remark
indicates factory setting values.
Remark
indicates factory setting values.
Advertisement
Table of Contents
