[Other Functions] Screen - Panasonic ag-hpx600p Operating Instructions Manual

Item
P2 BROWSE (OP3) Sets the P2 browsing function.
[ON]
[ON (+CTRL)]
[OFF]

[OTHER FUNCTIONS] screen

Item
USER FILE Saves, reads, or initializes user files in the built-in memory of the camera.
(page 84)
[LOAD], [SAVE], [INITIAL]
f This setting does not affect the items set on the [SCENE FILE] screen.
ACCESS LED Sets whether to light the access LED of the P2 card.
[ON], [OFF]
REC TALLY Sets the tally lamp display on the viewfinder.
[RED]
[GREEN]
[CHAR]
f The screen display for recording always appears regardless of the above
settings.
CLOCK SETTING Sets the built-in calendar (date and time).
For details, refer to "Setting the date/time of the internal clock" (page 31).
TIME ZONE Sets the time lag against the Greenwich Mean Time (GMT).
[−12:00] ... [0:00] ... [+13:00]
For details, refer to "Setting the date/time of the internal clock" (page 31).
GL PHASE Selects the output signal of which phase is to be locked to the signal input to the
<GENLOCK IN> terminal when in the HD (1080i, 720P) mode. (page 71)
[HD SDI]
[COMPOSITE]
H PHASE Adjusts the horizontal phase when locking the phase to the signal to the signal
input to the <GENLOCK IN> terminal.
[−512] ... [0] ... [+511]
SEEK SELECT
Selects the position to be cued when the <FF/)> or <%/REW> button is
pressed while playback is paused.
[CLIP]
[CLIP&T]
MENU INIT Initializes all the setting menus including all scene files F1 to F6 and user files
(including settings of SmartUI) to the factory settings.
Chapter 7 Menu Operations — Menu list
Description of settings
Activates theP2 browsing function.
Activates the P2 browsing function, and accepts recording
control of the camera as well as settings of time code and user
bits from the connected device.
Deactivates theP2 browsing function.
Description of settings
Illuminates the red tally lamp on the viewfinder during recording
with the camera. The front tally lamp and the back and rear tally
lamps on the body are illuminated.
Illuminates the green tally lamp on the viewfinder during
recording with the camera. The front tally lamp or the tally
lamps on the body are not illuminated
During recording with the camera, the tally lamp on the
viewfinder is not illuminated and the recording status is
displayed only with text on the screen. The front tally lamp or
the tally lamps on the body are not illuminated.
Locks the phase of HD SDI output signals.
Locks the phase of the down-converted composite signal.
Top of the clip
Top of the clip and text memo location
– 133 –
Remark
f If [PC MODE] is set to [ON] when OP3 is installed,
the selected item is displayed in blue and cannot
be set.
indicates factory setting values.
Remark
f This setting is not available in the following cases:
- The USB device mode is set.
- Clip connection is underway with one-clip
recording.
f User file includes the setting value of SmartUI.
f When the [HD SDI REMOTE] item is set to [ON]
and the recording operation control signal is
output superimposing to the HD SDI signal, the
front tally lamp on the viewfinder and the back
and rear tally lamps on the body are illuminated,
regardless of the setting of this item or recording
status of the camera.
f This setting is not initialized when initialization is
performed with the [INITIAL] item of [MENU INIT]
and [USER FILE].
f This setting is not available when the [SYSTEM
MODE] item is set to [480-59.94i], [576-50i], and
[1080-23.98PsF].
f Press and turn up or down the jog dial button,
and keep pressing it at the position to change the
value faster.
f This setting is not available in the following cases:
- The USB device mode is set.
- Clip connection is underway with one-clip
recording.
indicates factory setting values.