Table of Contents
Advertisement
Item
FB ADJUST
Adjusts the lens flange back.
[PROXY SETTING] screen
Available when the video encoder board (extra-cost option) is mounted. Items are grayed out and cannot be selected when the board is not mounted.
Item
REC MEDIA (OP1)
Selects media for recording proxy data.
[P2]
[P2&SD]
[OFF]
REC MODE (1080)
Sets the proxy data recording mode when the 1080 mode is selected.
(OP1)
[STD 2CH MP4], [SHQ 2CH MOV], [HQ 4CH MOV], [HQ 2CH MOV], [LOW 2CH
MOV]
REC MODE (720)
Sets the proxy data recording mode when the 720P mode is selected.
(OP1)
[STD 2CH MP4], [SHQ 2CH MOV], [HQ 4CH MOV], [HQ 2CH MOV]
REC MODE (SD)
Sets the proxy data recording mode only when SD mode is selected.
(OP1)
[STD 2CH MP4], [LOW 2CH MOV]
TC SUPER (OP3)
Sets superimposition of time code display on proxy data recorded images.
[UPPER]
[LOWER]
[OFF]
STREAMING MODE
Selects the proxy streaming function.
(OP1), (OP3)
[INHIBIT]
[RTP]
[HTTP]
[PC/USB/LAN] screen
Item
PC MODE SEL
Sets the operation mode of the camera when the [PC MODE] item is set to [ON],
and external devices (such as a hard disk drive and a computer) are connected
with USB 2.0.
[USB HOST]
[USB DEVICE]
PC MODE
Operates the camera in the mode selected at the [PC MODE SEL] item.
[ON]
[OFF]
f It is always set to [OFF] when the power is turned on.
NETWORK SEL
Sets the connection method when making network connection between external
(OP3)
devices (such as a computer) and the camera.
[WLAN]
[LAN]
Chapter 7 Menu Operations — Menu list
Description of settings
Description of settings
Records the proxy data to the P2 card.
Records proxy data in both the P2 card and SD memory card.
Does not record proxy data.
Superimposes time code on the upper area of recorded images.
Superimposes time code on the lower area of recorded images.
Does not superimpose time code on recorded images.
Stops the proxy streaming function.
Selects the RTP method.
Selects the HTTP live streaming method.
Description of settings
Selects the mode when using a hard disk drive by connecting to
the camera with USB 2.0.
Selects the mode when connecting the camera to a computer
with USB 2.0, and using the P2 card as a mass storage.
(page 146)
Operates in [PC MODE].
Stops [PC MODE] and returns to normal operation.
Connects with wireless LAN.
Connects with the <LAN> terminal.
– 132 –
Remark
f This can be adjusted when an auto-focus
compatible lens is attached.
indicates factory setting values.
Remark
f This setting is not available in the following cases:
- Clip connection is underway with one-clip
recording.
- The [REC FUNCTION] item is set to other than
[NORMAL].
- The [VFR] item is set to [ON].
Excluding the case when the frame rate and
the number of frames of recording playback are
matched (30P:30PN, 25P:25PN, 24P:24PN)
f This setting is not available when clip connection
is underway with one-clip recording.
f This setting is not available when clip connection
is underway with one-clip recording.
f This setting is not available when clip connection
is underway with one-clip recording.
f This setting is not available when clip connection
is underway with one-clip recording.
f In the following cases, proxy streaming function
is not activated even if set this item to [RTP] or
[HTTP].
- The [P2 BROWSE] item is [OFF].
- The [REC MODE] item for proxy is neither [HQ
2CH MOV] nor [LOW 2CH MOV].
- Proxy recording is set to be performed (the
[REC MEDIA] item is [P2] or [P2&SD]), and the
[PREREC MODE] item is set to [ON].
f If the proxy streaming function is not activated,
[STREAMING ERROR! SEE MODE CHECK
DISPLAY] is displayed at the bottom of the
viewfinder screen.
The status can be checked by closing the menu
screen and pushing the <DISP/MODE CHK>
switch towards the <CHK> side twice to display
the [PROXY/NETWORK] screen of the mode
check.
indicates factory setting values.
Remark
f This setting is not available when the [PC MODE]
item is set to [ON].
f This setting is not available when clip connection
is underway with one-clip recording.
f If [PC MODE] is set to [ON] when OP3 is installed,
the selected item is displayed in blue and cannot
be set.
indicates factory setting values.
Advertisement
Table of Contents
