Table of Contents
Advertisement
Audio (input) function section
1
1 <F.AUDIO LEVEL> dial
Adjusts the recording level of the audio channel selected in the [AUDIO] menu → [REC CH SETTINGS] → [VOL. SELECT] when the <AUDIO
SELECT CH1/3>/<AUDIO SELECT CH2/4> switch is set to <MANU>.
f Set whether to enable the <F.AUDIO LEVEL> dial at the [AUDIO] menu → [REC CH SETTINGS] → [FRONT VOL. CH1] to [FRONT VOL. CH4].
2 <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial
Adjusts the recording level of the audio channel when the <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch is set to <MANU>.
<AUDIO LEVEL CH1/3> dial: Adjusts the recording level of the audio channel 1 or the audio channel 3.
<AUDIO LEVEL CH2/4> dial: Adjusts the recording level of the audio channel 2 or the audio channel 4.
f Select the audio channel to adjust with the dial in the [AUDIO] menu → [REC CH SETTINGS] → [VOL. SELECT].
f Dial is equipped with a lock mechanism. Adjust by turning the dial while pressing it in.
3 <AUDIO IN CH1>/<AUDIO IN CH2>/<AUDIO IN CH3>/<AUDIO IN CH4> switch
Selects the audio signal to input to the audio channel 1 to audio channel 4.
<FRONT>: Inputs the audio signal of the microphone connected to the <MIC IN> terminal.
<W.L.>: Inputs the audio signal from the wireless microphone receiver.
<REAR>: Inputs the audio signal from the audio device connected to the <AUDIO IN CH1/3> terminal or the <AUDIO IN CH2/4> terminal.
@
NOTE
t When the stereo microphone AJ-MC900G (optional) is used, set both <AUDIO IN CH1> and <AUDIO IN CH2> (or <AUDIO IN CH3> and <AUDIO
IN CH4>) to <FRONT>.
L CH is recorded to the audio channel 1 or the audio channel 3, and R CH is recorded to the audio channel 2 or the audio channel 4, respectively.
4 <AUDIO SELECT CH1/3>/<AUDIO SELECT CH2/4> switch
Select the audio channel to adjust in the [AUDIO] menu → [REC CH SETTINGS] → [VOL. SELECT].
<AUDIO SELECT CH1/3> switch: Switches the method to adjust the recording level for the audio channel 1 or audio channel 3 with
<AUTO>/<MANU> (automatic/manual).
<AUDIO SELECT CH2/4> switch: Switches the method to adjust the recording level for the audio channel 2 or audio channel 4 with
<AUTO>/<MANU> (automatic/manual).
5 Wireless microphone slot
Mount the UniSlot wireless microphone receiver (optional).
6 <LINE>/<MIC> selector switch
Switches the audio signal input from the <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal.
<LINE>: Inputs audio signals from line-input audio equipment.
<MIC>: Inputs audio signals from the microphone.
7 Microphone input power selector switch
Turns on/off the power supply to the microphone connected to the <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal.
<+48V>: Supplies +48 V power to the microphone.
<OFF>: Does not supply power to the microphone.
@
NOTE
t When microphone input <+48V> is set and microphones are not connected to the <AUDIO IN CH1/3> and <AUDIO IN CH2/4> terminals, low-
frequency noise may occur. This is not a problem when a microphone is connected.
t When the [AUDIO] menu → [INPUT SETTINGS] → [REAR MIC POWER] → [ON] is not set, power is not supplied regardless of the switch
position.
8 <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal
Connects the audio equipment or the microphone.
<AUDIO IN CH1/3> terminal: Inputs the audio signal to the audio channel 1 and the audio channel 3.
<AUDIO IN CH2/4> terminal: Inputs the audio signal to the audio channel 2 and the audio channel 4.
9 Cable holder
Fixes HDMI cables, etc.
Chapter 2 Description of Parts — Audio (input) function section
5
2
3
4
6
7
8
– 22 –
11
9
10
Advertisement
Table of Contents
