Table of Contents
Advertisement
Screen
Corresponding button
CAM03:SETUP
Configures the white balance variable value and variable frame rate (VFR).
<%/REW> button
<FF/)> button
<PLAY/PAUSE> button
<MONITOR SEL> button
Chapter 8 Using SmartUI — Menu list
[VFR] (OP4)
Toggles the variable frame rate on/off.
f This setting is not available when the setting
menu on the viewfinder screen is open.
f Other conditions where the setting is not
available are same as the setting menu [VFR]
item on the viewfinder screen.
f During recording, operation is not changed even
if the setting is changed. The setting is applied
after recording is completed (and after clip
connection is completed in one clip recording).
[−]
Decreases the setting value of the selected item.
[+]
Increases the setting value of the selected item.
[→]
Moves the item selection to the right. When the item selection moves to the right edge, it moves back to
the left edge.
[F.RATE] (OP4)
Sets the variable frame rate.
f This setting is not available when the setting
menu on the viewfinder screen is open.
f Other conditions where the setting is not
available are same as the setting menu [FRAME
RATE] item on the viewfinder screen.
f During recording, operation is not changed even
if the setting is changed. The setting is applied
after recording is completed (and after clip
connection is completed in one clip recording).
[WB VAR]
Specifies the color temperature for the variable
function where any color temperature can be
specified.
– 140 –
Setting details and setting value
[ON], [OFF]
[1] - [60]
The available maximum frame rate value varies
depending on the settings.
[2.4K] to [3.2K] to [9.9K]
indicates factory setting values.
Advertisement
Table of Contents
