Connection; Connecting The Autodome Camera To The Pc; Power Cable And Wire Distances Guides - Bosch AUTODOME 7000 VG5-7230 Operation Manual

AUTODOME 7000
11

Connection

11.1

Connecting the AUTODOME camera to the PC

1.
2.
3.
Notice!
The camera can also be connected directly to a PC using an Ethernet crossover cable with
RJ45 connectors (see option B below).
1
1
Figure 12.1: AUTODOME 7000 Series System Configuration
1
2
3
4
Notice!
You can also use the Bosch Video Client software application to configure the network
settings for an AUTODOME 7000 Series camera. Go to www.boschsecurity.com to download
the Configuration Manager software and Operating Manual.
11.2

Power Cable and Wire Distances Guides

Power
115/230 VAC
Copper Wire
Bosch Security Systems, Inc.
Install the camera according to the instructions in the appropriate Installation section of
this manual.
Connect an Ethernet cable from camera's RJ45 connector to a dedicated network switch
to bypass the Local Area Network (LAN).
Connect the dedicated network switch to the RJ45 connector on the PC (see option A
below).
2
3
2
AUTODOME 7000 Series
IP Connection
Network Switch
Computer
To comply with local codes.
2
4
4
Operation Manual
Connection | en 71
2014.04 | 2.0 | F.01U.283.679