Table of Contents
Advertisement
IMPORTANT:
Once a PPPoE connection is established, the camera will not be available at the IP address specified in
SETTING – Basic – Network – Information but will be available at the IP address obtained from the
PPPoE server (SETTING – General – Network – PPPoE).
Use the option for [IP notification] to check the IP address assigned to the camera after a PPPoE
connection is established (see
6.3.3. DDNS (Dynamic DNS)
This menu provides options for configuring DDNS service. This service allows you to make
your cameras accessible over the Internet even though they are assigned a dynamic IP address,
which changes from time to time.
A domain name will be tied to the IP address of the camera. When the current IP address of
the camera is changed, it is automatically tied to a predefined domain name, so that the camera
can be accessed over the Internet any time despite its dynamic public IP address.
To use DDNS, select the option for [On] to enable it (Pic. 6.24).
IMPORTANT:
To use DDNS service, the camera must be connected to the Internet directly or through a router.
Server name: select a DDNS provider.
User ID: enter the username that you chose at registration.
Password: enter the password that you chose at registration.
Re-type password: re-type the password to ensure that there are no typing mistakes.
N35110 Operations User Manual
paragraph
6.3.6. for details).
Pic. 6.24
Chapter 6. SETTING: Basic Menu
46
Advertisement
Table of Contents
