Ddns (Dynamic Dns) - Beward N6601 Operation User's Manual

User ID: enter the user ID for authentication necessary for PPPoE connections. Type it up User ID: enter the user ID for authentication necessary for PPPoE connections. Type it up User ID: enter the user ID for authentication necessary for PPPoE connections. Type it up
to 64 characters. to 64 characters. to 64 characters.
Password: enter the password for authentication required for PPPoE connections. Type it Password: enter the password for authentication required for PPPoE connections. Type it Password: enter the password for authentication required for PPPoE connections. Type it
up to 32 characters. up to 32 characters. up to 32 characters.
Re-type Password: re-type the password to confirm. Re-type Password: re-type the password to confirm. Re-type Password: re-type the password to confirm.
Obtain DNS server address automatically: select this to obtain the address of DNS Obtain DNS server address automatically: select this to obtain the address of DNS Obtain DNS server address automatically: select this to obtain the address of DNS
server automatically. server automatically. server automatically.
Use the following DNS server address: select this when you set the fixed address as the Use the following DNS server address: select this when you set the fixed address as the Use the following DNS server address: select this when you set the fixed address as the
IP address of DNS server. IP address of DNS server. IP address of DNS server.
• • •
Primary DNS server: enter the IP address of the primary DNS server. Primary DNS server: enter the IP address of the primary DNS server. Primary DNS server: enter the IP address of the primary DNS server.
• • •
Secondary DNS server: enter the IP address of the secondary DNS server. Secondary DNS server: enter the IP address of the secondary DNS server. Secondary DNS server: enter the IP address of the secondary DNS server.
NOTE! NOTE! NOTE!
1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating Point-to- 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating Point-to- 1. PPPoE (Point-to-Point Protocol over Ethernet): PPPoE is a network protocol for encapsulating Point-to-
Point Protocol frames inside Ethernet frames. PPPoE connection is used mainly with ADSL service where Point Protocol frames inside Ethernet frames. PPPoE connection is used mainly with ADSL service where Point Protocol frames inside Ethernet frames. PPPoE connection is used mainly with ADSL service where
individual users connect to the ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL. individual users connect to the ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL. individual users connect to the ADSL transceiver (modem) over Ethernet work. It also widely used in XDSL.
(digital affiliate line such as ADSL, VDSL or SDSL). (digital affiliate line such as ADSL, VDSL or SDSL). (digital affiliate line such as ADSL, VDSL or SDSL).
2. The IP Camera needs to be rebooted after changing the network is completed. 2. The IP Camera needs to be rebooted after changing the network is completed. 2. The IP Camera needs to be rebooted after changing the network is completed.
3. The IP Camera with Intelligent IP Installer cannot be founded after turning on the PPPoE and reboot. 3. The IP Camera with Intelligent IP Installer cannot be founded after turning on the PPPoE and reboot. 3. The IP Camera with Intelligent IP Installer cannot be founded after turning on the PPPoE and reboot.

7.3.3. DDNS (Dynamic DNS)

7.3.3. DDNS (Dynamic DNS) 7.3.3. DDNS (Dynamic DNS)
N6601 Operations User Manual N6601 Operations User Manual N6601 Operations User Manual
Pic. 7.11 Pic. 7.11 Pic. 7.11
Chapter 7. Setting-basic menu Chapter 7. Setting-basic menu Chapter 7. Setting-basic menu
31 31 31