Defining The Local Network Parameters When Using A Dynamic Ip Address - Beward N13103 Installation & User Manual

Please make a note of the following parameters: IP address, Subnet mask, Default
gateway, DNS server.
IMPORTANT!
If you do not make a note of the network parameters, you will not be able to return the computer's network
settings to their initial state to connect it to a local network or the Internet after configuring the N13103.
Therefore, your computer will not have local network and/or Internet access.

5.1.1. Defining the Local Network Parameters When Using a Dynamic IP Address

NOTE:
This paragraph explains how to define the local network parameters if an IP address is automatically
assigned to your computer via DHCP server.
Connect a computer (laptop) to your local network using a network cable and wait until the
connection process is complete.
To define the local network settings, go to Start – Control Panel (Pic. 5.8).
In the opened window, click on the [View network status and tasks] in the [Network and
Internet] section (Pic. 5.9).
N13103 Installation User Manual
Chapter 5. Setting Up the Wired Connection for Windows 7
Pic. 5.8
16