Table of Contents
Advertisement
NOTE:
See your router's user manual for details on how to enable and configure the UPnP.
IMPORTANT:
Some routers do not support UPnP forwarding between LAN and WAN networks. Before configuring,
make sure your router supports this option.
IMPORTANT:
You must reboot the camera for the changes to take effect.. To do so, go to SETTING – Basic – System
– Initialize.
6.3.5. Bonjour
This menu allows you to enable Bonjour. If this option is enabled, it allows the camera to be
automatically discovered using Bonjour (Pic. 6.25).
NOTE:
Bonjour provides a general method to discover services on a local area network. The software is widely
used throughout Mac OS X, and allows users to set up a network without any configuration.
N35110 Operations User Manual
Chapter 6. SETTING: Basic Menu
Pic. 6.24
48
Advertisement
Table of Contents
