Table of Contents
Advertisement
6.1.3. Initialize
[Reboot]: click this button to reboot the camera. The camera takes 1-2 minutes to reboot. If
you click the [Reboot] button, the confirmation dialog box appears. The user will be prompted to
continue or cancel the reboot. Click [OK] to continue or click [Cancel] to cancel the reboot.
[Factory Default]: click this button to reset the camera to factory defaults. After that, the
camera will reboot. All settings including the IP address, the user name, and the password will
return to their defaults. Do not power off the camera until the reboot is completed!
If you click the [Factory Default] button, the confirmation dialog box appears. The user will
be prompted to continue or cancel the reset to factory defaults. Click [OK] to continue or click
[Cancel] to cancel.
NOTE:
See the
Appendix E
for information on camera's default values.
Backup setting data: you can save the camera settings to a file. Click [Save] and specify
the path where you want to save the settings and enter the file name.
NOTE:
When specifying the path, check the permissions on a folder where you want to save a snapshot. If you do
not have the permissions, you cannot save snapshots there.
In Windows 7, you need to start Internet Explorer as an administrator to save records on your local HDD.
Restore setting: you can restore previously saved settings. Click [Browse] to select the
backup file. In the appeared window, select the required file by clicking your left mouse button on
the name of the file and click [Open]. Click [OK] to start restoring the settings. When the
restoration is completed, the camera automatically restarts to apply the settings.
N35110 Operations User Manual
Chapter 6. SETTING: Basic Menu
Pic. 6.6
27
Advertisement
Table of Contents
