Table of Contents
Advertisement
PC clock: displays date and time of the computer that is used for connection to the camera
(client computer).
Date/Time format: select a date/time format.
Adjust: select how to set the camera's date and time.
Keep current setting: keeps the current date and time as they are.
Synchronize with PC: sets the same date and time as on the computer that is used for
connection to the camera.
Manual setting: select this mode to adjust the camera's date and time manually.
Synchronize with NTP: synchronizes your camera's date and time with an NTP server
(Network Time Protocol) located in the Internet (e.g. time.windows.com, time.nist.gov,
etc). Select an NTP server name and a time update interval (by default, camera's date
and time are typically updated once an hour).
NOTE:
By default, the camera time is synchronized with the following NTP server: pool.ntp.org.
IMPORTANT:
To synchronize the camera time, an NTP server must be accessible on the local network or over the
Internet. The camera must be connected to the Internet to synchronize the time with an Internet time
server.
Time Zone: choose the time zone in which the camera is located. The correct time zone is
important for the synchronization with an NTP server.
Daylight Saving Time: this item allows your camera's internal clock to be automatically
adjusted when daylight saving time changes. This parameter is important for the correct
synchronization with an NTP server. You can specify the start time and the end time so that the
camera's internal clock could be adjusted by date or by week number (Pic. 6.5).
N35110 Operations User Manual
Chapter 6. SETTING: Basic Menu
Pic. 6.5
26
Advertisement
Table of Contents
