Table of Contents
Advertisement
4.1. Installing ActiveX Controls
To view the camera images via Internet Explorer, you need to install the ActiveX controls.
To do so, follow these steps:
NOTE:
The installation is shown for Internet Explorer 8.0 and Windows 7.
Step 1: open Internet Explorer, type the IP address of your camera in the address bar (Pic.
4.2). Press Enter or click the Go To button.
IMPORTANT:
The camera's default IP address is 192.168.0.99. If the camera was assigned an IP address by a DHCP
server on the local network, use BEWARD IP Installer to find your camera on the network. If you use
multiple IP cameras, you need to change their default IP addresses so that each camera will have a
unique IP address.
NOTE:
To connect to the camera, you need to get your computer and your camera to the same subnet.
Step 2: you will see an authorization window where you should enter the camera's
username and password (Pic. 4.3)
N35110 Operations User Manual
Chapter 4. Managing the IP Camera via Internet Explorer
Pic. 4.2
12
Advertisement
Table of Contents
