Defining The Local Network Parameters When Using A Dynamic Ip Address - Beward N120 Installation & User Manual

Make a note of the following parameters: IP address, Subnet mask, Default gateway, DNS
server.
IMPORTANT!
If you do not make a note of the network parameters, then it will be impossible to return the computer's
network settings to their initial state and to connect it to a local network or the Internet after configuring the
N120.

5.1.1. Defining the Local Network Parameters when using a Dynamic IP Address

NOTE:
This paragraph explains how to define the local network parameters if an IP address is assigned to your
computer automatically (by DHCP-server).
Connect a computer (laptop) to your local network using a network cable and wait till the
connection process completing.
To define the local network settings, go to Start – Control Panel (Pic. 5.8).
In the opened window click on the [View network status and tasks] in the [Network and
Internet] section (Pic. 5.9).
N120 Installation User Manual
Chapter 5. Setting up the Wired Connection for Windows 7
Pic. 5.8
17