Table of Contents
Advertisement
Allow range: a range of IP addresses that can access the IP camera.
Start IP address: type the start IP address of the allowed IP range.
End IP address: type the end IP address of the IP allowed range.
To set a range of allowed IP addresses, enter the IP addresses in "Start IP address" and
"End IP address" and click the [Add] button, to delete a range of allowed IP addresses, click the
[Delete] button.
Allow range list: a list of IP addresses that can access the IP camera.
Deny range: a range of IP addresses that cannot access the IP camera.
Start IP address: type the start IP address of the denied IP range.
End IP address: type the end IP address of the denied IP range.
To set a range of denied IP addresses, enter the IP addresses in "Start IP address" and
"End IP address" and click the [Add] button, to delete a range of denied IP addresses, click the
[Delete] button.
Deny range list: a list of IP addresses that cannot access the IP camera.
IMPORTANT:
The IP address restriction is applicable only to the "Operator" and "Viewer" viewer mode and not
applicable to the "Admin" viewer mode.
N35110 Operations User Manual
Chapter 6. SETTING: Basic Menu
Рис. 6.31
55
Advertisement
Table of Contents
