Defining The Local Network Parameters When Using A Dynamic Ip Address - Beward N300 Installation & User Manual

Ip camera

Hide thumbs Also See for N300:

Table of Contents

IMPORTANT!

If you do not make a note of the network parameters, then it will be impossible to return the computer's

network settings to their initial state and to connect it to a local network or the Internet after configuring the

N300.

5.1.1. Defining the Local Network Parameters when using a Dynamic IP Address

NOTE:

This paragraph explains how to define the local network parameters if an IP address is assigned to your

computer automatically (by DHCP-server).

Connect a computer (laptop) to your local network using a network cable and wait till the

connection process completing.

To define the local network settings, go to Start – Control Panel (Pic. 5.8).

In the opened window click on the [View network status and tasks] in the [Network and

Internet] section (Pic. 5.9).

N300 Installation User Manual

Chapter 5. Setting Up the Wired Connection for Windows 7

Pic. 5.8

Table of Contents