Firmware upgrade: this item allows you to update the camera firmware. Click [Browse] or
specify the path of the firmware manually. In the appeared window select the required file by
clicking your left mouse button on the name of the file and click [Open]. Click [OK] to start
updating the firmware.
NOTE:
When the firmware is updated, all settings may automatically restore to their defaults. Before you start
updating the firmware, it is recommended to perform a backup of camera settings.
When the update is completed, the camera automatically reboots.
IMPORTANT:
When the update is completed, it is recommended to reset camera settings to their factory defaults.
IMPORTANT:
Be careful when you update camera firmware. Make sure that you use only the firmware designed for your
IP camera. Using the wrong firmware file may cause your camera to become inoperable. The
manufacturer is not liable for the incorrect firmware update. Do not disconnect your camera until the
update is completed.
6.1.4. Language
Upload Language Pack: you can upload a language module to change the camera's web
interface language. Click the [Browse] button. In the appeared window, left-click the language file
and click [Open]. Click [OK] to change the web interface language (Pic 6.7).
N35110 Operations User Manual
Chapter 6. SETTING: Basic Menu
Pic. 6.7
28