Table of Contents
Advertisement
Select the option for [On] and click OK to enable this function. After you save the changes,
the following settings will be available:
Notify type: you can choose to be notified of the change of: [DHCP], [Static IP], or
[PPPoE].
If any of these items is selected, the camera will send an e-mail message containing the
text of the [Message] box to the predefined e-mail address.
SMTP server name: enter the IP address or hostname of the SMTP server (64 characters
maximum).
SMTP server port: enter the port number of the SMTP server. The default value is 25.
SSL: check this box if your provider requires SSL communications.
Authentication: choose the appropriate authentication type.
Off: no authentication is required.
On: authentication is required. You can choose [SMTP] or [POP before SMTP].
POP server name: this item appears when the [POP before SMTP] option is selected. The
POP server name is required for the authorization (64 characters maximum).
User name: enter the username to access the mail server (64 characters maximum).
Password: enter the password to access the mail server (64 characters maximum).
Recipient e-mail address: enter an e-mail address to which alert e-mail messages are
sent (64 characters maximum). Multiple addresses (3 addresses maximum) are separated by
semicolons [;].
N35110 Operations User Manual
Chapter 6. SETTING: Basic Menu
Pic. 6.26
50
Advertisement
Table of Contents
