Motion Detection - Beward N35110 User Manual

IMPORTANT:
When using the [Alarm buffer] function, the camera sends the video that was captured before the
connection was lost (use the "pre-alarm period" option to specify the video length) and after the
connection is lost (use the "post-alarm period" option to specify the video length).
Recording capacity: displays maximum video length.
 Pre-alarm period: maximum video length before the connection is lost.
 Post-alarm period: maximum video length after the connection is lost.
Recording time: allows you to set the video length.
 Pre-alarm period: video length before the connection is lost.
 Post-alarm period: video length after the connection is lost.
IMPORTANT:
When you configuring this menu, be aware that these parameters are applied to the other camera
functions, for example to recording to network storage, FTP, etc.

7.9. Motion Detection

The motion detection menu allows you to configure up to 3 detection areas that may cross
each other. Besides, you can configure the threshold and the sensitivity for each of these areas.
This saves recording space by triggering an alarm recording only when motion is detected in any of
these areas. When the motion detection triggers, the camera creates an alert message or a video
file and sends it to e-mail, FTP server, network storage, or over HTTP (Pic. 7.22).
N35110 Operations User Manual
Pic. 7.21
Chapter 7. SETTING: Advanced
84