Table of Contents
Advertisement
NOTE:
For event-triggered recording, the recorded files are stored in the «Alarm» folder, which is located at the
path that is specified in the [Network storage location].
Image file name: enter a file name to save the records to network attached storage.
NOTE:
The file name may contain only Latin letters, reserved characters and numbers with no spaces in its name.
Suffix: select a suffix to add it to the file name. The following options are available:
Date Time: adds the date and time that correspond to the date and time the file was
created. This suffix contains the year as 4 digits, the month as 2 digits, the day as 2
digits, the hour as 2 digits, the minute as 2 digits, the second as 2 digits. Totally, this
adds a fourteen-digit suffix to the file name.
Sequence number: adds a six-digit sequence number to the file name. The sequence
number starts from 000001 and increases in increments of 1. User can click the [Clear]
button to reset the sequence number anytime. When user clicks the [Clear] button it
resets the sequence number and starts it from 000001.
Alarm: choose the desired options to designate the events that trigger the camera to start
recording to NAS:
Motion detection: the camera starts recording to NAS when motion is detected. To
configure this option, click the [Motion detection] button (appears if the [Motion
N35110 Operations User Manual
Pic. 7.13
Chapter 7. SETTING: Advanced
72
Advertisement
Table of Contents
