Table of Contents
Advertisement
URL: enter an IP address and a command prefix (64 characters maximum). For example,
192.168.1.7/cgi-bin/operator/ptzset.
NOTE:
You must enter the IP address of the device that handles CGI requests.
Port: enter a port number that is used for HTTP connections to the device. The default port
is 80.
User ID: enter a username to access the device (64 characters maximum).
Password: enter a password to access the device (32 characters maximum).
Proxy server name: if you use a proxy server, enter its hostname or IP address (64
characters maximum).
Proxy port number: if you use a proxy server, enter its port number.
Proxy user ID: if you use a proxy server, enter a username to access it (64 characters
maximum).
Proxy password: if you use a proxy server, enter a password to access it (32 characters
maximum).
[Test] button: click this button to check the validity of the entered parameters and the
connectivity. The test status window will open.
NOTE:
Click [ОК] to save changes. Otherwise, the changes will not be saved.
7.4.2. Alarm Sending
This menu allows you to configure the sending of requests to an external alarm device
when an event has occurred. Select the option for [On] to enable this feature (Pic. 7.17).
N35110 Operations User Manual
Chapter 7. SETTING: Advanced
77
Advertisement
Table of Contents
