Beward N35110 User Manual page 45

Obtain an IP address automatically (DHCP): if your network includes a DHCP server,
select this option to obtain an IP address automatically from a DHCP server on your network. After
you select this option, the "Obtain DNS server address automatically" option will appear.
Obtain DNS server address automatically: select this option to obtain DNS server
address automatically.
NOTE:
The [Obtain DNS server address automatically] option will appear only after the [Obtain an IP address
automatically (DHCP)] option is selected.
Use the following IP address: select this option to manually enter the IP address. After
you select this option, the following items will appear:
 IP address: enter the IP address for the IP camera. The default IP address is
192.168.0.99.
 Subnet mask: enter the subnet mask for the IP camera. The default subnet mask is
255.255.255.0.
 Default gateway: enter the gateway for the IP camera. The default gateway is
192.168.0.1.
Use the following DNS server address: select this option to manually enter the DNS
server addresses. This option will appear both when the option for "Use the following IP
address" is selected and when it is obtained automatically from a DHCP server.
 Primary DNS server: enter the IP address of the primary DNS server.
 Secondary DNS server: if required, enter the IP address of a secondary DNS server.
HTTP port number: the default port is 80. You can enter a port number from 1124 through
65535.
NOTE:
If you use an HTTP port number other than 80, you must specify the port number in the URL for the IP
camera to access it. For example, if the IP address of the IP camera is 192.168.1.100 and the HTTP port is
8081, enter the following URL in the address bar of your browser to access the camera:
http://192.168.1.100:8081
IMPORTANT:
You must reboot the camera for the changes to take effect. To do so, go to SETTING – Basic – System –
Initialize.
N35110 Operations User Manual
.
Chapter 6. SETTING: Basic Menu
44