Beward N35110 User Manual page 79

Alarm: choose the desired options to designate the events that trigger an external device:
Motion detection: the external device is triggered when the camera detects motion. To
configure this option, click the [Motion detection] button (appears if the [Motion detection] box is
checked) or go to SETTING – Advanced – Motion detection. For related information, see
paragraph 7.9.
 Parameter: specify a CGI script (Go to SETTING – Advanced – HTTP event– General
to set an IP address).
 Message: specify a request type. This option may be unavailable for some external
devices.
Audio detection: the external device is triggered when the camera detects noise. To
configure this option, click the [Audio detection] button (appears if the [Audio detection] box is
checked) or go to SETTING – Advanced – Audio detection. For related information, see
paragraph 7.10.
 Parameter: specify a CGI script (Go to SETTING – Advanced – HTTP event– General
to set an IP address).
 Message: specify a request type. This option may be unavailable for some external
devices.
N35110 Operations User Manual
Pic. 7.17
Chapter 7. SETTING: Advanced
78