Table of Contents
Advertisement
Image file name: enter a file name to save the records to network attached storage.
NOTE:
The file name may contain only Latin letters, reserved characters and numbers with no spaces in its name.
Suffix: select a suffix to add it to the file name. The following options are available:
Date Time: adds the date and time that correspond to the date and time the file was
created. This suffix contains the year as 4 digits, the month as 2 digits, the day as 2
digits, the hour as 2 digits, the minute as 2 digits, the second as 2 digits. Totally, this
adds a fourteen-digit suffix to the file name.
Sequence number: adds a six-digit sequence number to the file name. The sequence
number starts from 000001 and increases in increments of 1. User can click the [Clear]
button to reset the sequence number anytime. When user clicks the [Clear] button it
resets the sequence number and starts it from 000001.
File size: specify the size (from 1 to 50 MB) of the files recorded to NAS. The camera
records in AVI format.
Cyclic size: specify the disk space on the NAS or the shared folder. The size is from 100
MB to 1 TB. After the specified disk space is full, the oldest files are overwritten with the new ones.
NOTE:
When the maximum archive size is reached, it automatically overwrites the oldest files. However, the new
files may be written with a time delay, which includes a total time required for deleting the old files and
recording the new ones.
IMPORTANT:
If an alarm-triggered recording started at the time of a periodical recording, the periodical recording will be
stopped and will re-start only after the alarm-triggered recording ends.
Recording time: set a period for periodical recording to NAS. The following options are
available:
Always: the camera can record to NAS any time.
Schedule: select this option to configure the camera to record to NAS within a
designated schedule. To configure this option, click the [Schedule] button or go to
SETTING – Advanced – Schedule. For related information, see
NOTE:
Click [ОК] to save changes. Otherwise, the changes will not be saved.
N35110 Operations User Manual
Chapter 7. SETTING: Advanced
paragraph
7.6.
75
Advertisement
Table of Contents
