General - Beward N35110 User Manual

7.3.1. General

Select the option for [On] to enable the option for recording to network attached storage or
select the option for [Off] to disable it (Pic. 7.11).
Protocol: select a protocol to access the network attached storage.
 Windows network (SMB/CIFS): select this option for Windows network storage (e.g. a
Windows network shared folder).
 Unix network (NFS): select this option for Unix network shared folder (e.g. Linux OS).
Network storage location: specify the shared folder path. The camera creates a new
folder named «IPCamera <МАС address>» at the provided path.
NOTE:
When specifying Windows storage path, note that the path should be in the form of
for Unix storage, the path should be in the form of NAS_Server:\Record, where "NAS_Server" is the IP
address of the network storage or the shared folder.
If you select the Windows network protocol, it is necessary to specify the following
parameters as well:
Workgroup: enter your Windows workgroup name. The entered name must match the
workgroup name on the computer with the shared folder or the NAS server.
User name: enter the username to access the remote computer (or the NAS server).
Password: enter the password to access the remote computer (or the NAS server).
N35110 Operations User Manual
Pic. 7.11
Chapter 7. SETTING: Advanced
\\NAS_server\Record
;
70