Ddns (Dynamic Dns) - Beward N1000 Operation User's Manual

Re-type password: re-type the entered password to avoid mistakes in password
assignment.
Obtain DNS server address automatically: select this option to obtain a DNS address
automatically.
Use the following DNS server address: select this option to type DNS servers' addresses
manually.
 Primary DNS server: type the primary DNS server IP address.
 Secondary DNS server: type the secondary DNS server IP address.
IMPORTANT:
You must restart the camera for the changes to take effect. To do so, go to SETTING – Basic – System –
Initialize.
IMPORTANT:
After a PPPoE connection is established, the IP address you specified in SETTING – Basic – Network –
Information is unavailable and you need to type the IP address assigned by PPPoE server to access the
camera (SETTING – Basic – Network – PPPoE).
Use the option for [IP notification] to check the IP address assigned after PPPoE connection is
established (see paragraph 6.3.6. for details).

6.3.3. DDNS (Dynamic DNS)

This menu allows you to configure the DDNS connection. This feature allows the IP camera
to be easily accessible over the Internet even if you use a dynamic IP address.
The IP address is linked with a domain name. So, if your current IP address changes, it
automatically links to your domain name, which you can use any time to access your IP camera
over the Internet. Therefore, the camera must be assigned with a public dynamic IP address.
To use DDNS, select the option for [On] to enable it (Pic. 6.20).
IMPORTANT:
To use the DDNS feature, your IP camera must be connected to the Internet directly or through a router.
N1000 Operations User Manual
Chapter 6. SETTING: Basic
43