IMPORTANT!
When configuring this menu, be aware that these parameters are applied to all functions of the camera,
such as recording to NAS, transferring files to FTP, etc.
7.11. System Log
The system log captures and stores information about changes to the camera configuration
and its activities. The entries are added automatically once the camera is turned on (Pic. 7.24).
Enable remote log: check this box to send the log information to a designated server.
Server name: enter the host name or IP address of the remote server.
Server port: enter the port number of the remote server (the default port is 514).
Current log: this box displays the system log entries for your camera.
N35110 Operations User Manual
Pic. 7.24
Chapter 7. SETTING: Advanced
87