Table of Contents
Advertisement
Alarm: choose the desired options to designate the events that trigger the camera to send
alert e-mail messages:
Motion detection: the camera sends alert e-mail messages when motion is detected.
To configure this option, click the [Motion detection] button (appears if the [Motion
detection] box is checked) or go to SETTING – Advanced – Motion detection. See
paragraph 7.9
Audio detection: the camera sends alert e-mail messages when noise is detected. To
configure this option, click the [Audio detection] button (appears if the [Audio
detection] box is checked) or go to SETTING – Advanced – Audio detection. See
paragraph 7.10
IMPORTANT:
When motion or noise is detected, the video files are sent with an interval of 10-20 seconds between
them. The length of the video files is 5 seconds but the maximum size is 2 MB. When sending snapshot
images, the camera sends 3 pre-event images, 3 post-event images and 1 image captured at the moment
of the event. The pre-event and post-event images are sent with an interval of 1 image per 1-2 seconds
and the groups of images are sent with an interval of 8-10 seconds between them.
Network link down: the camera starts sending alert e-mail messages when the network
link is down. When the connection is lost, the camera saves the records made before
(the record length is specified in the "Pre-alarm period" menu) and after (the record
length is specified in the "Post-alarm period" menu) the connection is lost to the alarm
buffer.
After the connection is up, the camera sends these files to the specified e-mail addresses. If
"Video clip" is selected in the "Attached file type" menu, the camera sends two files (pre- and
post-event video). If "Snapshot" is selected in the "Attached file type" menu, the camera sends
1 image captured at the moment of the event, 3 pre-event images and 3 post-event images.
To configure this option, click the [Alarm buffer] button (appears if the [Network link
down] box is checked) or go to SETTING – Advanced – Alarm buffer. See
details.
NOTE:
The maximum length of the records that are attached to the alert e-mail is 5 seconds. However, the
maximum record size is 2 MB. Therefore, the length of the records may be less than 5 seconds even if the
user specifies the value of 5 seconds in the [Alarm buffer] menu.
N35110 Operations User Manual
for details.
for details.
Chapter 7. SETTING: Advanced
paragraph 7.8
for
66
Advertisement
Table of Contents
