Table of Contents
Advertisement
Schedule selection: designate a schedule for a certain configured action. The following
actions are available: [FTP – Alarm], [FTP – Periodical], [E-mail (SMTP) – Alarm], [E-mail
(SMTP) – Periodical], [Record – Alarm], [Record – Periodical], [Alarm output – Alarm],
[Alarm output – Timer], [HTTP event– Alarm], [IR schedule].
Start time, End time: choose the start time and the end time of the schedule. Use the first
field to select an hour (00 to 23/24); use the second field to select a minute (00 to 55 in increments
of 5).
Days of the week area: the following options are available for each day of the week:
Time frame: a drop-down list containing the time frames that were specified for the
schedule for each day of the week. If no time frame is specified, the drop-down list will
be empty.
[Add] button: adds the schedule that is defined in the [Start time] and [End time]
fields.
[Delete] button: clears the values that are in the [Time frame] field.
For user's convenience, the intervals appear as a scale, where blue color indicates that no
time frame is set for this period and red color shows the specified time frames.
NOTE:
You can add up to 5 schedules for each day of the week.
Use the same time schedule every day: applies the schedule that was added for Monday
to the whole week.
NOTE:
Click [ОК] to save the current schedule.
7.7. Alarm Input
This menu allows you to define what the camera should do when external sensor is
triggered.
NOTE:
If you use external sensors, be aware that the camera has logical I/O and exceeding the rated voltage and
current (max 30 W and 12 V) is PROHIBITED!
IMPORTANT:
Please refer to the N35110 Installation User Manual before using the alarm input/output.
N35110 Operations User Manual
Chapter 7. SETTING: Advanced
82
Advertisement
Table of Contents
