Chevrolet 1988 Light Duty Truck Repair Manual page 78

1B4-6 DA-V5 AIR CONDITIONING COMPRESSOR
J 33023-A
J 34992 A
A. P u lle y P u lle r J-33020 E n g a g e s in
In n e r C irc le o f P u lle y R o to r S lo ts
Figure 10— Installing the Pulley Rotor and Bearing
Puller Guide
• When removing the old pulley bearing (25)
allow the staking to remain, then file away the
old staked metal for proper fit when installing a
new bearing (25) in the pulley bore.
Install or C on n ect (F ig u re s 4, 13, 14, 15 and
16)
Tools Required:
J 6083 Snap Ring Pliers
J 8433-1 Puller Bar
J 9481 Pulley Bearing Installer
J 29886 Threaded Driver Handle
J 33017 Pulley and Bearing Assem bly Installer
J 33019 Bearing Staking Tool (with staking pin
and retaining band)
J 33023-A Puller Pilot
J 33026 C om pressor Holding Fixture
J 35372 C om pressor Support Block
1. Pulley (26) on J 35372 (figure 13).
Figure 11— Removing the Pulley Rotor and Bearing
Assembly
F-04563
Figure 12— Removing the Bearing from the Pulley
Rotor Assembly