Egr Valve In Stallatio; Flywheel In S Ta Lla Tio; Engine Accessory In S Ta Lla Tio - Chevrolet 1988 Light Duty Truck Repair Manual

6A3-24 4.3 LITER V-6
• Bolts on front and rear exhaust tubes to 28
N m (20 ft. lbs.).
• Bend the tab washers over the heads of all
bolts.
EGR VALVE INSTALLATION
0
Install or C o n n e c t
1. New gasket.
2. EGR valve.
3. Bolts.
$ T ig h ten
Bolts to 31 N m (23 ft. lbs.).
Figure 39— Valve Train Com ponents
Install or C o n n ect
1. Flywheel.
2. Flywheel bolts.
Install the engine accessories (distributor, carburetor, oil
filter, generator, etc.) as directed in the proper Truck
Service Manual. Connect all vacuum hoses and electrical
equipm ent the same way as removed.
40. Bolt
41. R etainer
42. Nuts
43. Balls
44. R ocker Arm s
45. Pushrods
46. R estrictor
47. H ydraulic Lifter
FLYWHEEL INSTALLATION
T ig h ten
• Bolts to 100 N m (75 ft. lbs.).
ENGINE ACCESSORY
INSTALLATION
B-07611