1B2-6 DA-6 AIR CONDITIONING COMPRESSOR
Figure 12— Installing the Pulley Rotor Bearing
A. Staking Pin
B. Rubber Band
Figure 13— Staking the Pulley Bearing in the
Rotor Bore
4. Pulley bearing retainer (3) using J 6083 (figure 8).
5. Clutch plate and hub assem bly (2).
CLUTCH COIL AND HOUSING
ASSEMBLY REPLACEMENT
R em ove or D isco n n ect (F ig u re s 3 and 16)
Tools Required:
J 8433-1 Puller Bar
J 08433-3 Puller Screw
J 33023-A Puller Pilot
J 33025 C lutch Coil Puller Legs
1. Clutch plate and hub assem bly (2).
2. Pulley (5).
• Mark or scribe the location of the clutch coil (6)
to term inal on the com pressor front head (11).
3. Clutch coil assem bly (6).
• Install J 33023-A on the head (11) of the
compressor.
• Install J 8433-1 with J 33025 (figure 16).
Figure 14— Staking Locations
J 33019
J 21352-A
B-06544
Stake Three
(3) L oca tion s
120° A part
B-06546