L.
M.
9.
17.
Figure 48— Installing the Com pressor Shell
19. Seal (31) and bushing (30) to the rear of the dis
charge cross-over tube (26).
20. Rear suction reed (48) over the dowel pins (45).
• Place the slot toward the sump.
21. Rear discharge valve plate (49) over the dowel pins
(45).
• Place the reed retainer up.
22. Inner oil pum p gar (50) over the shaft (39).
• Line up the identification marks.
23. Outer oil pump gear (51) over the inner gear (figure
50).
• Line up the identification marks.
• Face the com pressor oil sump and position
the outer gear (51) so that it meshes with the
inner gear (50) at the 9 o 'clock position. The
cavity between the gear teeth will be at the 3
o'clock position.
24. Seal (52) to the discharge valve plate (49).
• Lubricate the seal (52), shell (9), discharge
plate (49) and gears (50 and 51) with 525 vis
cosity refrigerant oil.
25. Suction screen (58) to the rear head (54).
A-6 AIR CONDITIONING COMPRESSOR 1B1-21
Figure 4 9 — Installing the Oil Pick-Up Tube
F-01393
Figure 50— Positioning the Oil Pump Gears
F-01394
F-01395