Chevrolet 1988 Light Duty Truck Repair Manual page 317

Figure 5— Removing the Tube Seat
Figure 7— Installing the Piston Assembly
T ig h ten
• Bolts to 30 N m (22 ft. lbs.).
Bracket (17) and nut (18).
T ig h ten
&
• Nut to 149 N m (110 ft. lbs.).
10. Boot (19).
11. Output pushrod (28), baffle (27), piston return spring
(25) and retainer (24) by using J 24551-A or J 25083
8
(figure ).
12. Retainer (26).
13. Spring (7), O-ring ( 6 ) and plug (5) (figure 3).
14. Retainer (4).
15. O-ring (3) and accum ulator (2) by using J 26889 and
a C-clamp (figure 2).
• Depress the accum ulator (2).
16. Retainer (1).
• Release the C-clamp.
• Remove J 26889.
17. Jam nut from the repair kit onto the pedal rod.
18. Eyelet onto the pedal rod.
A djust
• E ye le t to th e re q u ire d
BRAKES (SEC. 5) in the 1988 Light Duty Truck
Service Manual.
8. H ousing
25. Piston R eturn Spring
26. R e ta in e r
Figure 8— Installing the Output Rod Retainer
BRAKES 5-3
le n g th . R e fe r to
J-24551 (JB 8 , JF9)
j . 25083 (JD3 JD5)
' ' '
F-00767